ABB PPC907BE 3BHE024577R0101

Description

ABB PPC907BE 3BHE024577R0101

1. .Many products are not yet on the shelves please contact us for more products
2. .If there is any inconsistency between the product model and the picture on display, the model shall prevail. Contact us for the specific product picture, and we will arrange to take photos in the warehouse for confirmation
3. .We have 16 shared warehouses around the world, so please understand that it can sometimes take several hours to accurately return to you. Of course, we will respond to your concerns as soon as possible

The LED light is green, but the motor does not move.

PPC907BE 3BHE024577R0101 Fault cause: One or more motors in different directions are prohibited from operating.

Solution: Check the+INHIBIT and – INHIBIT ports.

Cause of malfunction: The command signal is not grounded to the driver signal.

After powering on, the LED light of the driver does not light up.

Cause of malfunction: The power supply voltage is too low, lower than the minimum voltage requirement.

Solution: Check and increase the power supply voltage.

When the motor rotates, the LED light flashes.

Fault cause: HALL phase error.

PPC907BE 3BHE024577R0101 Handling method: Check if the motor phase setting switch (60/120) is correct. Most brushless motors have a 120 phase difference.

Cause of malfunction: HALL sensor malfunction

Solution: When the motor rotates, check the voltage of Hall A, Hall B, and Hall C. The voltage value should be between 5VDC and 0.

Processing method: Connect the command signal ground to the driver signal ground.

• 📩Please contact us for the best price. Email: 【sauldcsplc@gmail.com】

• 🌐For more products, click here

📎📝Mailbox：sauldcsplc@gmail.com |PPC907BE 3BHE024577R0101
www.abbgedcs.com | Qiming Industrial Control | Simon +86 13822101417