Sale!
  • UTX1700PTFE (4)_副本

MECS CS-1000 UTX1700PTFE module

¥5,578.00

🔔Module Number: UTX1700PTFE

⚠️Product status:  Discontinued

🏚️Delivery time:  In stock

🆕Product status:   100% new

🌍Sales country: All over the world

🥇Product situation: one year warranty

📮Contact me: Sauldcsplc@gmail.com

💬Wechat/Whatsapp :+86 13822101417

☀️Have a good day! Thanks for watching my website!

Description

MECS CS-1000 UTX1700PTFE module

  1. .Many products are not yet on the shelves please contact us for more products
  2. .If there is any inconsistency between the product model and the picture on display, the model shall prevail. Contact us for the specific product picture, and we will arrange to take photos in the warehouse for confirmation
  3. .We have 16 shared warehouses around the world, so please understand that it can sometimes take several hours to accurately return to you. Of course, we will respond to your concerns as soon as possible
  • UTX1700PTFE is an IO Link slave transceiver chip that serves as a bridge between the MCU of external sensors or actuators and the 24V signal line that supports IO Link communication. When the IO Link device is connected to the master station, the master station initializes communication and exchanges data with the MCU, while HMT7742 acts as the physical layer for communication.

    Due to the fact that the three indicator lights (rated voltage of 24 V) controlled by the output port of UTX1700PTFE are powered by the IO Link power line, it is necessary to monitor the current on the power line in order to trigger appropriate corrective measures when the current exceeds a set threshold, such as cutting off the indicator lights from the IO Link power line. The current monitoring module uses an INA194 current detection amplifier. As a high current detector, INA194 is directly connected to the power supply and can detect all downstream faults. It has a very high common mode suppression ratio, as well as a large bandwidth and response speed. It can amplify the voltage on the induction resistor 5O times and output it to the forward input terminal of the MCU’s internal voltage comparator, AIR0. When the voltage value of AIR0 exceeds the threshold set at the reverse input terminal, the PB0 output is controlled to be low, and the indicator light LAMP can be cut off from the IO Link power line to achieve overcurrent protection function. This part of the circuit is shown in Figure 6.

    Please contact us for the best price. Email: 【sauldcsplc@gmail.com】

  • For more products, click here

 

Mailbox:sauldcsplc@gmail.com | UTX1700PTFE
www.abbgedcs.com | Qiming Industrial Control | Simon +86 13822101417

Reviews

There are no reviews yet.

Be the first to review “MECS CS-1000 UTX1700PTFE module”

Your email address will not be published. Required fields are marked *