ABB XO08R2 1SBP260109R1001

Description

ABB XO08R2 1SBP260109R1001

1. .Many products are not yet on the shelves please contact us for more products
2. .If there is any inconsistency between the product model and the picture on display, the model shall prevail. Contact us for the specific product picture, and we will arrange to take photos in the warehouse for confirmation
3. .We have 16 shared warehouses around the world, so please understand that it can sometimes take several hours to accurately return to you. Of course, we will respond to your concerns as soon as possible

Advantages and disadvantages of XO08R2 1SBP260109R1001
advantage
Support full duplex communication
Push pull drive (opposite to open drain) provides better signal integrity and higher speed
Higher throughput than I ² C or SMBus
The protocol is very flexible and supports “bit” transmission
Not limited to 8-bit per byte transmission
Information size, content, and purpose that can be freely selected
Extremely simple hardware interface:
Generally speaking, it requires lower power consumption than I ² C or SMBus because it requires fewer circuits (including pull-up resistors)
There is no arbitration mechanism or related failure mode
The ‘slave device’ uses the clock of the ‘master device’ and does not require an accurate crystal oscillator
‘Slave device’ does not require a separate address – unlike I ² C, GPIB, or SCSI
XO08R2 1SBP260109R1001 does not require a receiver/transmitter
Only 4 pins are used on one IC, and the wiring and layout connections on the board are much simpler than parallel interfaces
Each device can have at most one individual bus signal (chip selection); Everything else is shared
The signals are all unidirectional, making it very easy to perform current isolation
There is no upper limit to the speed of the clock, and there is potential to further increase the speed

Mailbox：sauldcsplc@gmail.com | XO08R2 1SBP260109R1001

www.abbgedcs.com | Qiming Industrial Control | Simon +86 13822101417