DS200RTBAG3AEB | GE | bus connector module

Description

DS200RTBAG3AEB | GE | bus connector module

1. .Many products are not yet on the shelves please contact us for more products
2. .If there is any inconsistency between the product model and the picture on display, the model shall prevail. Contact us for the specific product picture, and we will arrange to take photos in the warehouse for confirmation
3. .We have 16 shared warehouses around the world, so please understand that it can sometimes take several hours to accurately return to you. Of course, we will respond to your concerns as soon as possible

Starting from the left side of the rack, hang the modules onto the rails in the order of “power module first, then CPU, and finally SM/FM/CP/IM module”. The specific steps are as follows:
Insert the bus connector into the DS200RTBAG3AEB  and SM/FM/CP/IM. Except for the CPU, each module comes with a bus connector. When inserting bus connectors, it is necessary to start from the CPU. Unplug the bus connector of the “last” module in the assembly, as the “last” module does not accept bus connectors.

Assign slot DS200RTBAG3AEB  . Each installed module should be assigned a slot number, which will make it easier to allocate modules in the configuration table of STEP 7.
Attach the slot number to the module. First, bring the corresponding slot number to the relevant module, then place the tab into the opening of module ①, and finally press the slot number into module ②, disconnecting it from the wheel. Figure 6 illustrates this process

Mailbox：sauldcsplc@gmail.com |DS200RTBAG3AEB
www.abbgedcs.com | Qiming Industrial Automation| Simon +86 13822101417

We may provide the information of this product:
Guidance manual PDF /Datasheet/ Weight/ Size/ Orignal country/ Prodcuct COO & COM & COC
Certificate of conformity / Certificate of Origin / Certificate of Origin /Operation method
Delivery time/ Provide a one-year warranty / Brand New Original Authentic