FSEL003 F202174.02 | SCHENCK| System enables backup network card

Description

FSEL003 F202174.02 | SCHENCK| System enables backup network card

1. .Many products are not yet on the shelves please contact us for more products
2. .If there is any inconsistency between the product model and the picture on display, the model shall prevail. Contact us for the specific product picture, and we will arrange to take photos in the warehouse for confirmation
3. .We have 16 shared warehouses around the world, so please understand that it can sometimes take several hours to accurately return to you. Of course, we will respond to your concerns as soon as possible

FSEL003 F202174.02 Multiple Access Settings: Multiple network cards have independent parameters and work together. By selecting the network card, multiple network cards can be set separately.

◾ Network fault tolerance: Multiple network cards use the same IP address. When a network failure occurs on one network card, the system enables backup network cards to ensure normal network operation of the system.

⑥ Set IP address

◾ IPv4 address: The default IPv4 address is 192.168.1.64, which supports manual modification. It needs to be filled in with an address in the same network segment as the router (the first three digits of the website are the same, and the fourth digit is any number from 1 to 254).

◾ IPv4 subnet mask, default gateway: can be filled in consistent with the router (can be viewed in the “Running Status” section of the router’s web interface).

◾ MTU: MTU is the maximum transmission unit, which refers to the size of the maximum data packet passed through the TCP/UDP protocol network transmission. Default value, no modification required.

FSEL003 F202174.02 Click “OK” to complete the platform IP configuration. You can log in to the platform by entering the configured IP address in the browser.
To activate using SADP, the computer needs to be directly connected to the storage subsystem or the computer needs to be on the same local area network as the storage subsystem.

① Run SADP software on the computer and search for online devices within the local area network.

② Select the target devices in the list that need to be activated and have a security status of inactive.

③ Set a new password in the device activation box on the right, and once the device is confirmed, the security status will be updated to activated.

• Please contact us for the best price. Email: 【sauldcsplc@gmail.com】

• For more products, click here

Mailbox：sauldcsplc@gmail.com |FSEL003 F202174.02
www.abbgedcs.com | Qiming Industrial Control | Simon +86 13822101417