PFEA112-65 3BSE030369R65  | ABB | Adjusting the actuator

Description

PFEA112-65 3BSE030369R65  | ABB | Adjusting the actuator

1. .Many products are not yet on the shelves please contact us for more products
2. .If there is any inconsistency between the product model and the picture on display, the model shall prevail. Contact us for the specific product picture, and we will arrange to take photos in the warehouse for confirmation
3. .We have 16 shared warehouses around the world, so please understand that it can sometimes take several hours to accurately return to you. Of course, we will respond to your concerns as soon as possible

In the printing industry, in order to meet production requirements, PFEA112-65 3BSE030369R65 is often necessary to control the tension of some strip materials. The tension control system is a system developed by a microcontroller or some embedded devices and peripheral circuits. First, set the tension value required to be controlled directly, let the signal collected by the tension sensor (usually in the millivolt level) as the tension feedback value, compare the deviation between the two, adjust the actuator after internal intelligent PID calculation, automatically control the tension of material unwinding, intermediate guidance and coiling, so as to achieve the fastest response of the system. In special circumstances, users can also directly set a certain output amount to the actuator (often the current amount of magnetic powder). Figure 1 shows the basic components of the tension control system for printing machines.

As shown in PFEA112-65 3BSE030369R65 , first analyze the situation of material unwinding on the left side. Assuming that the tension of the material unwinding shaft is T, its linear speed is the working speed v1 of the traction roller, the linear speed of the unwinding drum is v2, the cross-sectional area of the material is S, and the elastic modulus of the material is E, the length from the traction roller to the unwinding drum is L, t=L/v1 is the time it takes for the material to be transported from the traction shaft to the unwinding drum. According to Hooke’s law, it can be obtained:

Perhaps you will need these products:

Tension controller: PFEA111-20 Order number: 3BSE028140R20
Tension controller: PFEA112-20 Order number: 3BSE030369R20
Tension controller: PFEA113-20 Order number: 3BSE028144R20
Tension controller: PFEA111-65 Order number: 3BSE028140R65
Tension controller: PFEA112-65 Order number: 3BSE030369R65
Tension controller: PFEA113-65 Order number: 3BSE028144R65
Tension controller: PFSA103C Order number: 3BSE002488R1
Tension connection box: PFXC141 Order number: 3BSE029997R1
Tension controller: PFVO 142 Order number: 3BSE023732R1
Tension controller: PFSA145 APPR.3KVA Order number: 3BSE008843R1
Pressure gauge: PFTL201C-50KN
Pressure gauge: PFCL201CE-50KN
Pressure gauge: PFCL201CD 20KN
PFTL 101B-5.0kN, weighing sensor 3BSE004191R1
PFTL 101B-10.0kN, weighing sensor 3BSE004197R1
PFTL 101B-20.0kN, weighing sensor 3BSE004203R1
PFTL 101AE-0.5kN, weighing sensor 3BSE004211R1
PFTL 101AE-2.0kN, weighing sensor 3BSE004213R1
PFTL 101A-0.5kN, weighing sensor 3BSE004160R1
PFTL 101A-1.0kN, weighing sensor 3BSE004166R1
PFTL 101B-2.0kN, weighing sensor 3BSE004185R1
PFTL 101A-2.0kN, weighing sensor 3BSE004172R1
PFCA 401F control unit 3BSE024387R3
PFCA 401S control unit 3BSE024387R2
PFXA 401S control unit 3BSE024388R2
PFXA 401F control unit 3BSE024388R3
PFXA 401SF control unit 3BSE024388R4
PFXA 401 control unit 3BSE024388R1
PFXA 401 control unit 3BSE024388R1
PFXA 401F control unit 3BSE024388R3
Control unit 3BSE024388R4
Control unit 3BSE024388R2
Control unit 3BSE024388R3
PFSA 103B, STU 48 areas 3BSE002487R1
PFSA 103C, STU 42 Area 3BSE002488R1
PFSA 140 Rolling Supply Unit 3BSE006503R1
PFSA 103E, STU 16 Area 3BSE016268R1
PFSA 103D, STU Zone 32 3BSE002489R1
PFSA 147A Service Panel 3BSE008884R1
PFSA 145 power filter 3BSE008843R1

Mailbox：sauldcsplc@gmail.com |PFEA111-65 3BSE028140R65
www.abbgedcs.com | Qiming Industrial Automation| Simon +86 13822101417