REXROTH VT-HNC100-1-14

Description

REXROTH VT-HNC100-1-14

1. .Many products are not yet on the shelves please contact us for more products
2. .If there is any inconsistency between the product model and the picture on display, the model shall prevail. Contact us for the specific product picture, and we will arrange to take photos in the warehouse for confirmation
3. .We have 16 shared warehouses around the world, so please understand that it can sometimes take several hours to accurately return to you. Of course, we will respond to your concerns as soon as possible

VT-HNC100-1-14 is a Bosch Rexroth programmable NC control. It is designed for closed loop control applications. Closed-loop control provides higher accuracy and precision compared to open-loop control, and is a requirement for applications that require higher accuracy and precision. Typical control applications include transfer lines, plastics processing machines, presses and rail bound vehicles. The measuring system on the VT-HNC100-1-14 includes an incremental or absolute, ±10 Volts reference voltage and 4 to 20 milliamps or 0 to ±10 Volts analog. The controller supports multiple freely configurable control variants, including position controller, synchronization control, pressure/force controller, and position dependent braking. Power consumption of the NC control is 8 Watts. It requires DC input at voltages ranging from 18 to 32 Volts. WIN-PED software is available for control configuration. This software runs on a computer with 80286 or better processor, 8 MB or more of RAM and 10 MB of hard disk capacity. An RS-232 interface is available on the VT-HNC100-1-14 control for computer communication. The programming software is not provided with the NC control. Rather operators can either order it on CD-ROM or download it from the manufacturer’s website. The NC control has four analog inputs for different voltage with -15 to 15 Volts range, 200 kilohms input resistance, 5 millivolts input resolution and less than 10 millivolts non-linearity. The NC control also has four current inputs that support 4 to 20 milliamps input current, 100 Ohms input resistance, and 5 microamps resolution. The four input impedance channels on the NC control support -10 to 10 Volts, greater than 10 megaohms input resistance, and 5 millivolts resistance. Only trained personnel should handle, install, and operate the NC control.

Mailbox：sauldcsplc@gmail.com | VT-HNC100-1-14
www.abbgedcs.com | Qiming Industrial Automation| Simon +86 13822101417