TRICONEX 3625C1 | TRICONEX | Welding assembly process module

Description

TRICONEX 3625C1 | TRICONEX | Welding assembly process module

1. .Many products are not yet on the shelves please contact us for more products
2. .If there is any inconsistency between the product model and the picture on display, the model shall prevail. Contact us for the specific product picture, and we will arrange to take photos in the warehouse for confirmation
3. .We have 16 shared warehouses around the world, so please understand that it can sometimes take several hours to accurately return to you. Of course, we will respond to your concerns as soon as possible

TRICONEX 3625C1  generally recommended that the actual power used be 30-80% of the rated power of the module power supply (the specific proportion is also related to other factors, which will be mentioned later). Within this power range, the performance of the module power supply in all aspects is relatively sufficient and stable and reliable. A light load causes resource waste, while a heavy load is detrimental to temperature rise, reliability, and other factors. All module power supplies have a certain overload capacity, but it is still not recommended to work under overload conditions for a long time, as this is a short-term emergency measure.
TRICONEX 3625C1  Packaging form
The external dimensions and output form of DC/DC converters vary greatly. The low-power product adopts a sealed shell, which has a very slim appearance; High power products often adopt the form of quarter brick or half brick, with the circuit exposed or wrapped in a casing. When selecting,

Two aspects need to be noted:
Firstly, whether the pins are on the same plane;
TRICONEX 3625C1  , whether it is easy to weld.
The SMT converter must comply with the requirements of the IEC191-6:1990 standard, which strictly limits the coplanar problem of SMT device pins. Non coplanar device pins can cause difficulty in positioning during device assembly, seriously affecting welding quality and increasing defect rates.
The SMT converter should be able to withstand the specified welding conditions. For the vast majority of modern assembly lines, devices must meet the reflow soldering requirements specified in the CEC00802 standard, that is, the surface temperature of the device can exceed 300 ℃. If the converter cannot meet this requirement, a specialized welding assembly process needs to be designed for it, which will increase assembly time and production costs.

Mailbox：sauldcsplc@gmail.com |TRICONEX 3625C1
www.abbgedcs.com | Qiming Industrial Automation| Simon +86 13822101417